Loading ...
Loading ...
Loading ...
15
EN
www.napoleon.com
N415-0563CE-GB-DE JUL 16.19
CAUTION! During unpacking and assembly we recommended you wear work gloves and safety
glasses for your protecon. Although we make every eort to make the assembly process as problem
free and safe as possible, it is characterisc of fabricated steel parts that the edges and corners might
be sharp and could cause cuts if handled incorrectly.
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
Geng Started
1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any
components packed inside. Use the parts list to ensure all necessary parts are included.
2.
3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being
lost or damaged while assembling.
4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed
prior to using the grill. The protecve coang has been removed from some of the parts during the
manufacturing process and may have le behind a residue that can be perceived as scratches or
blemishes. To remove the residue, vigorously wipe the stainless steel in the same direcon as the
grain.
5.
6.
WARNING! Construcon materials and masonry dust may cause surface damage to units and ac-
cessories. The best opon is to install components aer all construcon has been completed and the
jobsite has been thoroughly cleaned. If the components must be installed prior to the construcon
being completed, then exposed surfaces need to be covered to prevent corrosion. All surfaces must be
cleaned when construcon is completed. Do not use muriac acid to clean masonry materials from
any surfaces. The lime contained in some construcon materials is extremely corrosive. During its cur-
ing period, (1 - 2 months) it is recommended that a stainless steel polish or wax (car wax is acceptable)
be applied to prevent direct contact of the lime materials.
!
Loading ...
Loading ...
Loading ...