Loading ...
Loading ...
Loading ...
12
EN
www.napoleon.com
N415-0563CE-GB-DE JUL 16.19
Tube Burner: The burners are made from heavy wall 304 stainless steel, but extreme heat and a corrosive
environment can cause surface corrosion to occur. This can be removed with a brass wire brush.
CAUTION! Beware of Spiders.
clean the inside of the burner. Shake any loose debris from the burner through the gas inlet. Check the
corrosion, use an opened paperclip or the supplied port maintenance bit to clean them. Drill out blocked
ports using this drill bit in a small cordless drill. The ports are easier to clean if the burner is removed from
Reinstallaon: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing.
WARNING! When reinstalling the burner aer cleaning it is very important
that the valve/orice enters the burner tube before lighng your gas grill. If the
valve is not inside the burner tube a re or explosion could occur.
Protecon Of Infrared Burners: The infrared burners of your grill are designed to provide a long service
life, though care must taken to prevent cracking of their ceramic surfaces. Fractures will cause the burners
them. Damage caused by failure to follow these steps is not covered by your grill warranty.
removing cooking grates and accessories into or from the grill.
pressure to crack the ceramic. Repeated soaking of the ceramic can also cause it to swell and expand. This
expansion causes undue pressure on the ceramic that can cause it to crack and crumble.
the ceramic for evidence of possible watersoaking. If the ceramic appears to be wet, remove the burner
from the grill. Turn it upside down to drain the excess water and bring indoors to dry thoroughly.
way to escape the grill. If the hot air is not allowed to escape, the burners can become deprived of oxygen
REPLACEMENT SCREEN S81006
Infrared Burners
that fall onto the burner surface are immediately incinerated. However, some debris and residue may
!
Loading ...
Loading ...
Loading ...