Loading ...
Loading ...
Loading ...
Scrolling forward once will bring you to RESET. Press “ENTER” to see your reset
options, NO or YES. Scroll to your desired outcome and press “ENTER”. If you
chose to reset the counter, the display will return to the counter display and show
zero tests preformed. If you choose NO, the display will proceed to the Home
Screen.
Scrolling forward twice will bring you to the print screen for the counter display.
Maintenance and Care
A basic amount of care and maintenance will allow your tester to provide years of
valuable service.
• After each use, ensure that there is no corrosion on clamps. If there is corrosion
on clamps, use a damp cloth to wipe corrosion off of the clamps.
• After each use, ensure that leads have not been damaged or have come
into contact with aggressive fluids, such as grease, engine oil, ATF or battery
corrosion. If leads are damaged, call Technical Service at 913.310.1053
immediately. NEVER use tester if leads show signs of damage. If leads have
come into contact with aggressive fluids, use a damp cloth to wipe the leads
clean.
• After each use, return the tester to its storage case to protect the tester when not
in use.
• If tester body becomes dirty or soiled, use a damp cloth to wipe it clean.
• If tester display becomes dirty, use a screen cleaning product, such as those
used to clean glasses or computer monitors, to wipe the display clean. When
cleaning the display, take care not to scratch or otherwise damage it.
• Periodically replace onboard batteries (rear compartment) to avoid a situation
where the batteries run down at a critical moment.
• When storing tester for extended periods of inactivity, remove onboard batteries.
Loading ...
Loading ...
Loading ...