Loading ...
Loading ...
Loading ...
www.PyleUSA.com
4
1. INTRODUCTION
Caution!
We should like to draw your attention to the fact that extreme volumes may damage your hearing
and/or your headphones or loudspeakers. Turn the MAIN MIX control and PHONES control in the
main section fully counter-clockwise before you switch on the unit. Always be careful to set appropriate
volume levels.
Important notes concerning installation
The sound quality may diminish within the range of powerful broadcasting stations and high-frequency
sources. Increase the distance between the transmitter and the device and use shielded cables for all
connections.
1.1 General mixing console functions
A mixing console fulls three main functions:
• Signal processing: Preamplication, level adjustment, mixing of eects, frequency equalization.
• Signal distribution: Summing of signals to the aux sends for eects processing and monitor mix,
distribution to one or several recording tracks, power amp(s), control room and 2-track outputs.
• Mix: Setting the volume level, frequency distribution and positioning of the individual signals in the
stereo eld, level control of the total mix to match the recording devices/crossover/power amplier(s).
All other mixer functions can be included in this main function.
The interface of the mixing consoles is optimized for these tasks enabling you to easily keep track of
the signal path.
1.2 Before you get started
1.2.1 Shipment
Your mixing console was carefully packed in the factory to guarantee safe transport. Nevertheless, we
recommend that you carefully examine the packaging and its contents for any signs of physical
damage, which may have occurred during transit.
• If the unit is damaged, please do NOT return it to us, but notify your dealer and the shipping company
immediately, otherwise claims for damage or replacement may not be granted.
1.2.2 Initial operation
Be sure that there is enough space around the unit for cooling purposes and to avoid over-heating
please do not place your mixing console on high-temperature devices such as radiators or power
amps. The console is connected to the mains via the supplied cable. The console meets the required
safety standards. Blown fuses must only be replaced by fuses of the same type and rating.
• Never connect the Mixer to the power supply unit when the latter is connected to the mains!
First connect the power supply unit to the console, then connect the power supply unit to the mains.
• Please note that all units must be properly grounded. For your own safety, you should never remove any
ground connectors from electrical devices or power cables, or render them inoperative.
• Please ensure that only qualied people install and operate the mixing console. During installation and
operation, the user must have sucient electrical contact to earth, otherwise electrostatic discharges
might aect the operation of the unit.
1.2.3 Online registration
Please register your new equipment right after your purchase by visiting PyleUSA.com/register and
read the terms and conditions of our warranty carefully. Should your product malfunction, it is our
intention to have it repaired as quickly as possible. To arrange for warranty service, please contact
the retailer from whom the equipment was purchased. Should your dealer not be located in your
vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is
included in the original equipment packaging. Should your country not be listed, please contact the
distributor nearest you.
A list of distributors can be found in the support area of our website (www.PyleUSA.com).
Registering your purchase and equipment with us helps us process your repair claims more quickly
and eciently. Thank you for your cooperation!
Loading ...
Loading ...
Loading ...