Loading ...
Loading ...
Loading ...
13
TCA52 09/2007
en
Using coffee beans
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deep-freeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Important: Fill the water tank with fresh
water every day. The tank must always
containsufcientwaterforoperatingthe
appliance. Do not allow it to become empty.
Tip: Pre-warm cups, especially small, thick
espresso cups, by placing on the cup shelf
14 or rinsing with hot water.
The appliance must be ready for use.
●Placetheprewarmedcup(s)underthe
coffee outlet 9.
●Press5 or K to select the desired
coffee strength. The coffee is brewed and
dispensed into the cup(s).
●Coffeedeliverystopsautomaticallywhen
the selected quantity has been dispensed
(factory setting approx. 125 ml).
i The brewing process can be terminated
at any time by pressing the coffee
dispensing button 5 or K.
Extra coffee
It is possible to dispense the same amount
of coffee a second time.
●Justpressthecoffeedispensingbutton
5 or K within 3 seconds after brewing is
complete.
Note: The second cup is brewed using the
previously ground coffee.
Changing volume
dispensed
It is possible to change the factory setting
(approx. 125 ml) for the volume of mild or
strong coffee to be dispensed.
●Pressandholdthecoffeedispensing
button 5 or K until the desired volume of
coffee has been delivered (range approx.
30 – 220 ml).
i The volume can be changed again at
any time. To restore the factory setting of
approximately 125 ml, simply reset the
appliance.
Reset: Switch the appliance to stand-by
and remove the trays 17 and 18. Press
and hold the dispensing buttons 5 and K
simultaneously for at least 5 seconds. The
LEDs 7a, b, c and d (H, I, S, J) light up
briey.Replacethetrays17 and 18 and
press the stand-by button a to switch the
appliance on again.
Preparing hot water
The appliance must be ready for use.
This function allows water to be heated for
a cup of tea, for example.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!.
●Placeanappropriatecupunderthe
nozzle 8.
●Pushthesleeveonthenozzle8 all the
way down.
●Turnthedial6 to g/h.
! Risk of scalding
When the dial is set to g/h, the nozzle
may sputter a little. Do not touch the nozzle
8 or point it at anyone.
●Endtheprocessbyturningthedial6
back to O.
Loading ...
Loading ...
Loading ...