Loading ...
Loading ...
Loading ...
OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Delay Start of Cleaning
Quick Reminder:
1. Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or D= REASE pad
until the desired Clean Time appears.
3. Press the STOP TIME pad.
4. Press the INCREASE or DECREASE pad until
the desired Stop Time appea_ in the display.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow the directions in the Before a Clean
Cycle section.
2. After closing the door, press the AUTO
SELF CLEAN pad.
5. Press the INCREASE pad to change the
Stop Time to a laler time of day if
desired. For example: If you set Stop
Time at 11 :(11,oven will start clean
cycle at 8:(X)and end at 11:00. The d_x_r
latches automatically.
When the time of day reaches the automatic start
time, CLEAN, ON and LOCK appear in the display.
6. When the LOCK light is off, open the door.
NOTE:
• During a delayed self-clean operation
you can find out when the oven is set to
turn on by pressing and holding the
AUTO SELF CLEAN pad for 3 seconds.
• A fan may automatically turn on and off to cool
internal parts. This is normal, and the fan may
continue to run after the oven is turned off,
&
3. Press the INCREASE or DECREASE
pad to enter Clean Time.
4. Press the STOP TIME pad. "STOP
TIME" and the earliest Stop Time you
can set will appear in the display.
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If the
Clean Time is three hours and the time of day is 6:00,
the Stop Time that appears in the display will be 9:00.
28
Loading ...
Loading ...
Loading ...