Loading ...
Loading ...
Loading ...
EN
22 23
This function can identify which section of the emission control system has
malfunctioned.
This function checks whether or not the various emissions-related systems
on the vehicle are operating properly, and are ready for Inspection and
Maintenance testing.
It can also be used to check the Monitor Run Status and to conrm if the repair
of a car fault has been performed correctly.
This function retrieves and displays live data and parameters from the
vehicle’s ECU.
This function takes a snapshot of the operating conditions when an emission-
related fault occurs.
This function retrieves O2 sensor monitor test results of the most recently
completed tests from the vehicle’s on-board computer.
This function erases the codes from the vehicle, after retrieving codes from the
vehicle and certain repairs have been carried out.
Make sure the vehicle’s ignition key is in the ON position with the engine being
off before the operation.
3.1 Read Codes
3.3 I/M Readiness
3.4 Data Stream
3.5 View Freeze Frame
3.6 O2 Sensor Test
3.2 Erase Codes
This function retrieves test results for emission-related powertrain components
and systems that are not continuously monitored. The test’s availability is
determined by the vehicle manufacturer.
This function initiates a leak test for the vehicle’s EVAP system.
Refer to the vehicle’s service repair manual to determine the procedures
necessary to stop the test.
This function retrieves a list of information (provided by the vehicle
manufacturer) from the vehicle’s on-board computer.
This information may include:
•
VIN (Vehicle Identication Number).
•
CID (Calibration ID).
•
CVN (Calibration Verication Number).
3.7 On-Board Monitor Test
3.8 EVAP System Test
3.9 Vehicle Info
This module can record and establish the le of the diagnosed vehicles, including
all diagnostic-related data such as diagnostic reports, data stream records,
and screenshots.
4. ArtiFolder
Loading ...
Loading ...
Loading ...