Loading ...
Loading ...
7.5 AMP HAMMER DRILL 3
SAFETY INFORMATION
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATIONS
Motor
120V~, 60Hz, 7.5A
No-Load Speed
0-3,000/min
Hammer speed
0-48,000BPM
Chuck Capacity
1/2" (13mm)
Maximum drilling capacity:
In wood
1-3/8" (34 mm)
In metal
1/2" (13 mm)
In concrete
5/8" (16 mm)
Please read and understand this entire manual before attempting to assemble or operate
this product. If you have any questions regarding the product, please call Hammerhead
customer service at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) &
10:00 a.m. – 6:00 p.m. EST (Saturday and Sunday).
WARNING
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power-tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield, when
needed. We recommend using a wide vision safety mask over eyeglasses or standard
safety glasses with shields. Always use eye protection marked to comply with ANSI Z87.1.
DANGER
People with electronic devices, such as pacemakers, should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
Know the Tool
To operate this tool, carefully read this manual and all labels affixed to the hammer drill
before using it. Keep this manual available for future reference.
Some of the following symbols may be used on this hammer drill. Please study them and
their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and more safely.
Loading ...
Loading ...
Loading ...