Loading ...
Loading ...
Loading ...
7.5 AMP HAMMER DRILL 13
OPERATING INSTRUCTIONS
4. Depth gauge
Change the position of the depth gauge,
turn the grip of the handle anti-clockwise
until the depth gauge is loose enough to
slide in the hole. Set the depth, checking
the depth with a steel ruler for most
accurate measurement and then turn the
handle grip clockwise to tighten both the
depth gauge and the auxiliary handle in
the required position.
5. Selecting the impact/drill mode
The impact/drill switch should be set
according to the type of action required.
The tool has two settings:
a) Drill mode: For drilling into wood
and metal. Use standard drill bits.
b) Impact mode: For drilling into
stone and masonry. Use masonry
drill bits.
4
8
5
Loading ...
Loading ...
Loading ...