Loading ...
Loading ...
Loading ...
16
Attention for outdoor ventilation of cooker hood: If you choose②or④ air direction,
you need to remove the filter and panel decorative strip according to steps “a” and “b”
in step 6 of INSTALLATION to install and remove carbon filters.
1. Before installing or replacing the carbon filters, disconnect the mains power to
the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both sides of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4. Replace the mesh filter.
5. Connect the power supply to the wall socket.
NOTE:
Make sure the filter is securely locked. Otherwise, it would loosen and cause
danger.
When activated carbon filter attached, the suction power will be lowered.
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled
down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
Note:
Before changing the lights, make sure that the appliance is turned off and
unplugged.
Protect against danger when changing lights, such as wearing gloves.
Changing the light
Use a screwdriver to carefully pry the lamp along the edge to remove it. Then slowly
pull out the lamp wire for replacement.
• ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
– LED modules –rectangle lamp
– Max wattage: 4×1.5 W
– Voltage range: DC 12V
– Dimensions:
Loading ...
Loading ...
Loading ...