Loading ...
Loading ...
Loading ...
20
CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on the burrs which can impede performance.
Unlock hopper
Empty hopper Replace hopper Lock hopper
Run grinder
empty
Unlock hopper Remove hopper
Remove top burr
Unlock top burr
Clean top burr
with brush
Clean lower
burr with brush
Clean chute
with brush
ADVANCED CLEANING FOR THE CONICAL BURR GRINDER
This step is only required if there is a blockage between the grinding burrs and the grinder outlet.
Remove hopper
Set GRIND SIZE
to 1 (finest)
Use 10mm socket.
Rotate clockwise
to loosen the
nut only
Set GRIND SIZE
to 30 (coarsest)
Unlock & remove
top burr
Remove nut,
spring & flat
washer. Carefully
remove lower burr
Remove grind fan
& washers using
long-nose pliers
Insert & lock
top burr
Set GRIND SIZE
to 15. Replace
& lock hopper
Clean chute
with brush
Unblock the grinds
exit chute using
the brush or a pipe
cleaner
Insert washers
& grind fan using
long-nose pliers
Insert lower burr
(drive pin &
cavity to align).
Insert flat washer
& spring washer
Rotate counter-
clockwise to
tighten nut
WARNING
Care should be taken as the grinder burrs are extremely sharp.
Loading ...
Loading ...
Loading ...