Loading ...
Loading ...
Loading ...
Test the sound level and position the HD video monitor
To ensure that your HD video monitor is always at its best performance, the parent unit
will prompt a message and ask you to update its software and the baby unit's firmware
when there are new versions available.
• Follow the instructions on the parent unit screen to update your HD video monitor.
If you skip the updates, the parent unit and baby unit will be updated automatically
when the parent unit is powered off, and then powered on again.
Connect your HD video monitor with home Wi-Fi network
• You must connect your video monitor to your secured home Wi-Fi network in order
to receive the latest software and firmware updates. To set it up, go to
> Configure Wi-Fi.
Auto software and firmware update
• This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should
not be used as such.
Testing the sound level of the HD video monitor
• For hearing protection, make sure the parent unit is more than 3 meters away from the baby
unit. If you hear any high-pitched noise from the parent unit, move the parent unit further
until the noise stops. You can also press - VOL on the parent unit to lower or mute the noise.
• Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.
Positioning the HD video monitor
• Keep the baby unit out of the reach of your baby. Never place
or mount the baby unit inside the baby’s crib or playpen.
1. Place the baby unit more than 1 meter away from your
baby.
2. Adjust the angle of the baby unit to aim at your baby. Refer
to the online help on how to use the Pan/tilt and Zoom
functions of the baby unit.
3. To avoid causing high-pitched screeching noise from your HD video monitor:
•
Make sure your baby unit and parent unit are more than 3 meters apart; OR
• Turn down the volume of your parent unit.
>
10ft (3m)
> 3ft (1m)
>
10ft (3m)
<
10ft (3m)
Loading ...
Loading ...
Loading ...