Loading ...
Loading ...
Loading ...
Parent unit icons
Main
Menu
Options
Monitoring mode (* For VM901-2HD only)
• View baby unit 1 or 2 in Single
mode.
• View both baby units in Patrol
mode.
• View both baby units in Split
screen.
Melodies and soothing sounds
• Select play all melodies, or play
one of the five melodies and four
soothing sounds.
• You can also set the timer to stop
playing after 15, 30 or 60 minutes,
or playing non-stop.
Alerts - Sound, motion and temperature
• Select the sound and motion
sensitivity level.
• Turn on/off sound and motion
detection alerts.
• Select maximum and minimum
temperature for alert range.
• Turn on/off temperature alert.
• Turn on/off Auto Wake Up
function.
Parent unit settings
• Adjust parent unit screen
brightness.
• Turn on/off dim mode.
Baby unit settings
• Turn on/off Night Vision.
• Turn on/off baby unit’s status LED.
• Adjust baby unit’s speaker volume.
• Update baby unit’s security key.
Main
Menu
Options
General settings
• Connect to home Wi-Fi network.
• Turn on/off Parent unit Wi-Fi
Connection.
• Connect mobile phone.
• Turn on/off Low Battery Alert Tone.
• Turn on/off No Link Alert Tone.
Status icons
Direct mode
Parent unit, baby unit 1 and baby unit 2
(*For VM901-2HD only) are connected to
each others directly.
Router mode
Parent unit, baby unit 1 and baby unit 2
(*For VM901-2HD only) are connected to
home Wi-Fi network.
Baby unit 1 and 2 are being viewed in
Patrol mode (*For VM901-2HD only).
Baby unit 1 and 2 are being viewed in
Split mode (*For VM901-2HD only).
Night vision is turned on.
Motion alert is turned on.
Sound detection alert is turned on.
Melodies and soothing sounds are turned
on.
6-level sound indicator
•
indicates low sound level detected
by the baby unit.
• indicates moderate sound level
detected by the baby unit.
• indicates high sound level
detected by the baby unit.
Parent unit speaker is muted.
Temperature alert is turned on.
Charge the battery before use
The parent unit runs on rechargeable battery or AC
power. To continuously monitor your baby, keep the
parent unit connected to AC power. With the battery
alone, the parent unit can cordlessly run for a short time
only.
• Before using the baby monitor for the first time, charge
the parent unit battery for 12 hours. When the parent unit
battery is fully charged, the battery icon becomes solid
.
• It takes longer to charge when the parent unit is turned on. To shorten the
charging time, turn the parent unit off while charging.
• The standby time varies depending on your actual use.
After the parent unit is fully charged, press POWER until the
welcoming screen appears.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays and
. The light flashes.
The battery has very little
charge and may be used
for only a short time.
Charge
without interruption
(about
30 minutes).
The battery icon becomes
solid .
The battery is fully
charged.
To keep the battery charged, connect
it to AC power when not in use.
Connect, charge and power on the baby monitor
Raise the parent unit
antenna for better reception
Loading ...
Loading ...
Loading ...