Loading ...
Loading ...
Loading ...
26
Light Meaning
Preparation with pre-
ground coee has been
selected without placing
any pre-ground coee in the
funnel. Make sure the funnel
is not blocked, then add one
level measure of pre-ground
coee and repeat delivery.
The water circuit is empty.
Deliver hot water by turning
the dial to the posi-
tion or pressing the “Steam”
button
The grounds container
needs emptying
→
Light Meaning
The grounds container is
missing, or not inserted
correctly: insert the drip
tray complete with grounds
container and press as far as
it will go
Descaling is required (“12.
Descaling” and the dedi-
cated section of the Quick
Guide)
Descaling has been inter-
rupted. To use the machine
again:
1. Press the
button;
2. If the steam dial is in
the O position, turn it
to the position;
delivery will begin and
descaling will resume
from Fig. 14, page 10.
14. TROUBLESHOOTING
Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact customer services.
PROBLEM POSSIBLE CAUSE REMEDY
The appliance does not come on. It is not plugged into the mains socket. Plug into the mains socket.
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot
water (Please note: you can use the hot
water function).
The internal circuits of the appliance have
cooled down because 2-3 minutes have
elapsed since the last coee was made.
Before making coee, press and hold the
button for a few seconds to perform a
rinse cycle and warm the internal circuits.
Coee temperature setting too low.
Set a hotter coee temperature in the set-
tings menu (see “9. Settings menu”).
The machine must be descaled Carry out the descale procedure. Next,
check the water hardness (“6. Measuring
water hardness”) and make certain the
machine setting matches the local water
supply hardness (“9. Settings menu”).
→
Loading ...
Loading ...