Loading ...
Loading ...
Loading ...
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
●
If a stopwatch timing operation is in
progress, press (D) to stop it and then
press (A) to reset the stopwatch to all
zeros before performing the operation
in step 2.
2. Press (A) to display [SPL].
Minutes, seconds
3. Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
up to that point (split time), alternating
with [SPL] for about eight seconds.
D
A
D
Stop
Split
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
After first hourFirst hour
1/100 seconds
Seconds
Minutes, seconds Hours, minutes
4. Press (A) to reset the stopwatch to all
zeros.
Measuring Lap Times
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
●
If a stopwatch timing operation is in
progress, press (D) to stop it and then
press (A) to reset the stopwatch to all
zeros before performing the operation
in step 2.
2. Press (A) to display [LAP].
Minutes, seconds
3. Use the operations below to measure
elapsed time.
●
Each time you press (A), the watch
displays the time elapsed (lap time)
since the last lap time operation,
alternating with the lap number for about
eight seconds.
D
A
D
Stop
Start
Lap
●
Elapsed lap time is displayed in 1/100-
second units for the first hour. After that,
it is displayed in one-second units.
After first hourFirst hour
1/100 seconds
Seconds
Minutes, seconds Hours, minutes
4. Press (A) to reset the stopwatch to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted when battery power is
low.
Using CASIO WATCHES to
Configure Timer Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the timer
start time.
l
Configuring Watch Settings
Watch Operation Guide 5684
21
Loading ...
Loading ...
Loading ...