Loading ...
Loading ...
Loading ...
3.
X
Press (C) twice.
This causes the seconds to flash.
Seconds
4.
X
Hold down (B) for at least three
seconds. This will cause the [PAIR] and
[CLR] indicators to alternate on the
display. Release the button when only
[CLR] is displayed.
This deletes the pairing information from
the watch and returns to the timekeeping
display.
5.
X
Press (A) to return to the Timekeeping
Mode.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Time Adjustment
Your watch can connect with a phone to obtain
information that it uses to adjust its date and
time setting.
Important!
●
When you are on an aircraft or in any
other location where radio signals area
may cause problems, enable the
watch’s Airplane Mode to disable
connection with your phone.
l
Using the Watch in a Medical
Facility or Aircraft
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
l
Getting Ready
l
Auto Time Adjustment
12:30
If your phone cannot connect with the
watch
You can adjust time settings by
performing operations on the watch.
l
Using Watch Operations to Adjust the
Time Setting
Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
●
Setting a Home City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3. Use (B) and (D) to change the Home City
setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
●
For details refer to the information
below.
l
City Table
4. Press (C).
Watch Operation Guide 5684
15
Loading ...
Loading ...
Loading ...