Loading ...
Loading ...
Loading ...
Auto Time Adjustment
Your watch will connect with a phone at preset
times each day and adjust its time settings
automatically.
●
Using This Function
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While CASIO WATCHES is not
running on the phone
Note
●
If the watch does not indicate the
correct time even if is able to connect
with a phone, adjust the hand
positions.
l
Adjusting Hand Alignment
●
If there is a World Time City specified
with CASIO WATCHES, its time will
also be adjusted automatically.
●
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Move the phone close to (within one meter
of) the watch.
3.
X
Press (D).
[TIME] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
After time adjustmentTrying to connect
Note
●
The connection is terminated
automatically after time adjustment is
complete.
●
If time adjustment fails for some
reason, [ERR] will appear.
●
[RCVD] flashes when the receive
operation starts, and [RCVD] appears
after it is complete.
Configuring Reminder
Settings
After you use CASIO WATCHES to create
reminders, appointments, anniversaries, or
other events you need to remember, you can
check them on the watch.
●
You can have up to five reminders
registered.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the mode hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Follow the instructions that appear on
the screen to configure reminder settings.
●
You can input up to 18 alphanumeric
characters as a reminder title.
Note
●
To prevent the appointments from
being displayed on the watch, use
CASIO WATCHES to turn off the
reminder setting.
Watch Operation Guide 5684
11
Loading ...
Loading ...
Loading ...