Loading ...
Loading ...
Loading ...
9
Technical Data
Motor ........................................................................................... 230 W
Battery Voltage Max* .......................................................... 24V D.C.
Battery Capacity ....................................................................... 2.5 Ah
Charger Input .......................................................... 100 – 240V AC,
50 – 60 Hz, 0.4A
Charger Output ............................................. 26V DC
450 mA
Charge Time Max ......................................................... 5 hrs 30 min
Bar/Chain Length ................................................... 5 inch (12.7 cm)
Cutting Thickness Max .......................................... 4.5 in. (11.4 cm)
Oil Bottle Capacity ................................................. 0.7 Fl oz (20 ml)
Net Weight ................................................................. 4.2 lbs (1.9 kg)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under
typical load is 21.6 volts.
Unpacking
Carton Contents
• Cordless pruning saw with chain and bar
pre-assembled
• Cutting bar sheath (assembled on the chain and bar)
• Bonus cutting chain
• Hex key wrench (in the storage slot)
• 0.7 Fl oz (20 ml) lubrication oil
• 24V iON+ lithium-ion battery
• 24V iON+ lithium-ion battery charger
• Manual with registration card
1. Carefully remove the cordless pruning saw and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pruning saw. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be working,
connect to the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells “recover” some of their charge
after resting.
Charger Operation
m
WARNING! Charge only 24V iON+ lithium-ion battery
pack with its compatible 24V iON+ lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-LT
Lithium-iON Battery
NOTE: The iON+ 24VBAT-LT lithium-iON battery pack does not
develop a "memory" when charged after only a partial discharge.
Therefore, it is not necessary to run down the battery pack
before inserting the charger plug.
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...