Loading ...
Loading ...
Loading ...
14
Maintenance
Please contact an authorized Snow Joe
®
+ Sun Joe
®
dealer
or call the Snow Joe
®
+ Sun Joe
®
customer service center
at 1-866-SNOWJOE (1-866-766-9563) for all maintenance
operations not foreseen in this manual. Any operation performed
in an unauthorized service center or by unqualified personnel
will completely invalidate the warranty.
mWARNING! For your safety and that of others:
• Correct maintenance is essential to maintain the original
efficiency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
• Only use original Snow Joe
®
+ Sun Joe
®
replacement parts.
Parts that are not of the same quality can seriously damage
the equipment, compromise safety, and invalidate the
warranty.
mWARNING! Always remove the battery before performing
any adjustments, maintenance, or repairs to your cordless
pruning saw.
• Use protective gloves when handling the bar and chain.
• Keep the bar encased in its sheath, except when working
directly on the bar or the chain.
• Never dispose of oils or other polluting materials in
unauthorized places.
Motor Cooling
To avoid overheating and damage to the motor, always keep the
ventilation slots clean and free of sawdust and debris.
General Cleaning
It's recommended to clean the pruning saw immediately after
each use for best performance. Use a cloth, a paintbrush
or a brush to remove dust and wood splinters. Always keep
the ventilation slots clean and free from obstructions. Clean
the housing of the pruning saw regularly with a damp cloth
and somewhat soft soap. Do not use any cleaning or solvent
materials. Make sure that no water or any other liquid can get
inside the cordless power tool.
Clean the sprocket area with a brush or compressed air
(Fig. 10).
Replacing the Guide Bar and Chain
NOTE: When replacing the guide bar and chain, use only
identical replacement parts. Make sure the battery is not
inserted in the compartment before proceeding with operation.
mWARNING! Always wear heavy-duty gloves when handling
the bar and chain. Mount the bar and chain very carefully so
as not to impair the safety and efficiency of the machine. If in
doubt, contact an authorized Snow Joe
®
+ Sun Joe
®
dealer
or call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! The operation should be completed on a flat
and stable surface, with adequate space for moving the machine
and its components.
mDANGER! Never start the motor before installing the guide
bar, chain, and sprocket cover. Without all these parts in place,
the clutch can fly off or explode, exposing the user to potentially
serious injuries.
When you first purchase your pruning saw, the chain and bar will
come pre-assembled on the saw. Should you need to replace
the chain in the future, follow the steps below.
1. Screw the chain/sprocket end cover knob
counterclockwise to release chain/sprocket end cover
(Fig. 11).
Fig. 10
R
Fig. 11
End cover knob
Chain/sprocket
end cover
Loading ...
Loading ...
Loading ...