Loading ...
Loading ...
Loading ...
32 - INSTALLATION 91477A862/A
burners.
Removing the hob top
1. Remove the grids from the hob.
2. Remove the knobs lifting them from their
housing.
3. Remove the flame-spreader crowns and
relative burner caps.
4. Unscrew the screws under each burner to
remove the fixing plate.
5. Remove the gasket on each burner's
thermocouple and igniter.
6. Remove the top.
Replacing the nozzles/air regulation
7. Unscrew screw "A" and push air regulator
"B" as far as it will go.
8. Use a spanner to remove the nozzles "C"
and install the new ones for the required gas
supply, following the indications given in the
relevant table (see "Gas types and
countries").
9. Adjust the air flow by moving the air
regulator "B" to obtain the distance "D"
given in the corresponding table (see "Gas
types and countries").
10.After adjusting each burner, reassemble the
appliance correctly.
In order to be able to replace the
nozzles, the appliance must be
removed from the built-in unit.
The nozzle tightening torque must be no
more than 3 Nm.
Loading ...
Loading ...
Loading ...