Loading ...
Loading ...
Loading ...
Operation
IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During
transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one
quart of water prior to drinking any water.
NOTICE: After unpacking your Ice Maker with Water Dispenser, it must rest in an upright
position for at least two hours before you plug it in or the compressor may be damaged,
shortening the life span of the unit.
Turn the Ice Maker with Water Dispenser On/Off
1 Plug in the ice maker with water dispenser.
2 Run water through the cold and hot water taps until water begins to dispense.
3 To power on the cooling system,press “Cold Water” touch button. Then cooling indicator light
starts flashing.If the cool water is ready, the light is steadily on. Press “Cold Water” touch button
again to turn it off.
4 To power on the heating system,press “Hot Water” touch button. Then heating indicator light
starts flashing. If the hot water is ready, the light is steadily on. Press “Hot Water” touch button
again to turn it off.
5 To power on the ice maker s
ystem,press “Ice Block” touch button. Then ice making indicator
light starts flashing.If the ice maker tank is full,then the light is steadily on. Press “Ice Block”
touch button again to turn off.
Dispense Cold Water(#3)
NOTE: It will take approximately 1 hour after plugging in and turning on to make water
completely chilled. The cooling light will be steadily on once the water is fully chilled.
1 Put a drinking glass or container under the cold water faucet. Press “Cold” button to dispense
6
Loading ...
Loading ...
Loading ...