Loading ...
Loading ...
Loading ...
Clean internal component(#7)
1 Press the two clips on upper part of back plate to open the back plate.
2.Turn the two vertical locks center-wise to horizontal position.
4.Pull out the ice making box.
5.Press the cold water tank cover clip and open the cold water tank.
6.Clean the interior with diluted detergent, warm water, and a soft cloth.
7.Drain the water from the bottom by unplug the cool water drain plug. Make sure to put back
the cool water drain plug after drainage.
8.Put back the cold water reservoir cover and pu
sh back the ice making box, twisting the two
clips into place and rotating them clockwise.
9.Make sure the silicone tube connect well.
10.Push back the back plate.
Caution: The Ice Maker with Water Dispenser will heat water to a temperature of
approximately 185°F. It can cause severe burns if not handled carefully. Please use caution
while operating and cleaning. Please allow ample time for any hot water inside the machine to
cool down before draining it.
9
Loading ...
Loading ...
Loading ...