Craftsman 917271825 lawn tractor

User Manual - Page 23

For 917271825.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
CLEANING
Clean engine, battery, seat, finish, etc.
of all foreign matter.
Keep finished surfaces and wheels
free of all gasoline, oil, etc.
Protect painted surfaces with automo-
tive typewax.
We do not recommend using a garden
hose to clean your tractor unless the
electrical system, muffler, air filter and
carburetor are covered to keep water out.
Water in engine can result in a shortened
engine life.
,_ CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1. Depress clutch/brake pedal fully and set parking brake.
2, Place motion control lever in neutral (N) position.
3. Place attachment clutch in =DISENGAGED" position,
4. Turn ignitionkey "OFF" and remove key.
5. Make sure the blades and all moving parts have completely stopped.
6. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug,
TRACTOR
TO REMOVE MOWER
Mower will be easier to remove from the
rightside oftractor.
t. Place attachment clutch in "DISEN-
GAGED" position.
2, Move attachment liftlever forward to
lower mower to its lowest position,
3. Roll belt off engine pulley,
4, Remove small retainer spdng, and lift
clutchspringoff pulley bolt.
5. Remove large retainer spring, slide
collar off and push housing guide out
of bracket.
6. Disconnect anti-swaybar from chassis
bracket by removing retainer spring,
7. Disconnect suspension arms from
rear deck brackets by removing
retainer springs.
8. Disconnect front links from deck by
removing retainer springs.
9. Raise liftlever to raise suspension
arms. Slide mower out from under
tractor.
IMPORTANT: If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links and hook
the clutch spring Into square hole in
frame.
TO INSTALL MOWER
1. Raise attachment lift lever to its
highest position.
2. Slide mower under tractor with
deflector shield to right side of tractor.
3. Lower lift lever to its lowest position.
4. Install mower in reverse order of
removal instructions.
Small Retainer Spring "'%;°.
Clutch
Square Hole
Anti-Swa
Hou_ng
Large Retainer Bracket
Spring
(Both Sides)
23
Loading ...
Loading ...
Loading ...