Loading ...
Loading ...
Loading ...
CHECKTIRE PRESSURE
The tires on your tractor were overinflated
at the factoryfor shipping purposes.
Correcttire pressure is important tor best
cutting performance.
• Reduce tire pressure to PSI shown in
"PRODUCT SPECIFICATIONS" section
of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO
LEVEL MOWER HOUSING" in the
Service and Adjustmentssection of this
manual
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figuresthat are shown for
replacing motion and mower blade drive
belts in the Service and Adjustments
section of this manual, Verify that the
belts ere routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your
tractor,check to see that the brake is
properly adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this manual,
INSTALL MULCHER PLATE
(If previously removed)
1. Raise and hold deflector shield in
upright position.
2, Place front of mulsher plate over front
of mower deck opening and slide into
place, as shown.
3. Hook front latchinto hole onfront of
mower deck.
4. Hook rear latch intohole on back of
mower deck.
CAUTION: Do net remove deflector
shield from mower. Raise and hold shield
when attaching mulcher plate and allow it
to reston plate while in operation.
Deflector
Mulcher
Plate
Latch
Hooks
TO CONVERTTO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional
grass catcher accessory.
NOTE: It is notnecessary to change
blades, The mulcher blades are de-
signed for discharging and bagging also.
10
Loading ...
Loading ...
Loading ...