Loading ...
Loading ...
Loading ...
18
10
Open the window or French door slightly and set the outlet
B9 in place as shown in gure 7.
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
AIR CONDITIONING WITH INSTALLATION
If desired, your appliance can also be installed semi-permanent-
ly (Fig.8), following the distances shown in the gure.
min. 30 cm
min. 30 cm
In this case, the following steps are necessary:
Drill a hole (134 mm diam.) in an outside wall or through
the glass in a window. Follow the height (see g. 11) and
sizes of the hole indicated in gure 9.
134
Attach the ange accessory B1 provided to the hole.
Fit the adapter B3 in the air exhaust hose housing A7 on
the back of the appliance (see g. 1).
Screw the wall mounting accessory B4 on the air exhaust
hose B2. If necessary, remove the other adapter B3 from
the air exhaust hose B2 by unscrewing it (g. 10).
Screw the hose on the machine.
1
2
Fit the end of the hose B2 to the ange B1 as shown in g.
11.
Whenever the hose B2 is not attached, the hole can be closed
using the cap for the ange B1.
Limit the length and curves of the air hose as much as
possible, avoiding any obstruction.
8
9
7
in the window
glass
in the wood
base of the
French door
in the wall: we
recommend
insulating the
section of the wall
with a suitable
insulation material
Loading ...
Loading ...
Loading ...