Loading ...
Loading ...
Loading ...
ELECTRIC SHOCK can be fatal
Have an electrician install and service this equipment.
Turn the input power off at the fuse box, disconnect or unplug supply lines and
allow machine to sit for five minutes minimum to allow the power capacitors to
discharge before working inside this equipment.
Do not touch electrically hot parts. Turn the input power OFF and unplug the machine from
the receptacle before working on this equipment.
FUMES AND GASES can be dangerous
Keep your head out of fumes.
Use ventilation or exhaust to remove fumes from breathing zone
WELDING SPARKS can cause fires or explosions
Keep flammable material away.
Do not weld, cut or gouge on containers that have held combustibles.
ARC RAYS can burn
Wear eye, ear and body protection.
WELDING STEPS
Make sure power is off on the MIG140 welding machine
Remove nozzle and contact tip
Power on MIG140 welding machine
Straighten welding gun
Hold trigger of the welding gun (depressing trigger will feed the welding wire into the welding
gun.) When the welding wire is exposed at the outlet side of the welding gun, release the
trigger switch of the welding gun
Make sure power is off on the MIG140 welding machine
Reinstall the nozzle and contact tip
Cut off the welding wire 1/4-1/2” (6-10mm) away from the tip end of the welding gun and get
ready for welding
Loading ...
Loading ...