Loading ...
Loading ...
Loading ...
3
Water connection should be plumbed in
accordance with National / Local Codes covering
installation.
A cold water supply can be connected to the
water inlet connection (
1
/
2
" OD Copper Tube),
located as shown in the drawings in the
‘Specifications Section’.
A
1
/
2
" BSP Male Connector is supplied loose,
for connection to the
1
/
2
" OD Copper water
connections, if required.
Maximum Water Supply Pressure 550kPa (80psi).
A water drainage point (R1
1
/
4
” BSPT) is located
203mm from the LH side of the appliance and
442mm from the ground.
CSP6 GAS Stock Pot.
The Gas Stock Pot is only available as a single
burner model. The module is fitted with a Duckbill
type burner.
A commercial heavy duty, gas fired, high
performance Stock Pot designed for commercial
cooking, using LPG (Propane) or Natural Gas.
This model is delivered completely assembled.
Ensure that the adjustable feet are securely
attached.
NOTE:
This appliance is fitted with adjustable feet to
enable the appliance to be positioned securely
and level. This should be carried out on
completion of the gas connection. Refer to the
‘Gas Connection’ information overleaf and in the
‘Installation Section’.
The Stock Pot burner ring is controlled by its own
individual regulator. Refer to the Specification
Drawings for gas inlet positions for the Stock Pot.
Gas Connection is
3
/
4
” BSP male.
Loading ...
Loading ...
Loading ...