Loading ...
Loading ...
Loading ...
INSTALLATION
5 Fit the front part of the Clean Station to the
reference line on the Extra Plate.
6 Place the Clean Station on an even oor
and near an electrical outlet and plug it in.
❇ When the Clean Station is plugged in, the
Status Indicator at the top of the Clean
Station turns white for a short time.
NOTE
• Install the Clean Station in a place where the oor and wall are level.
• If the power cord is too long for the installation environment, coil the power cord around the
cable management post, then put it in the xing groove at the rear of the Clean Station.
• If you reinstall the Clean Station to a new position of 45 degrees or 1 m or more from the
previous installed place, recreate the map using the SmartThings App. (If you use the existing
map, some places may not be cleaned.)
English
14
2023-07-13 오전 2:39:28
Loading ...
Loading ...
Loading ...