Loading ...
Loading ...
Loading ...
GENERAL INSTRUCTIONS
PACKING LIST
- Shear with Grass Cutter Blade Assembled
- Shrub Trimming Blade
- Blade Guards
- Rechargeable Battery
- Battery Charger
- Owner’s Manual
UNPACKING
Carefully remove the product from the box. Make sure that
all items listed in the packing list are included.
Inspect all items carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
WARNING: If any parts are damaged or missing please
do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious
personal injury. Call our customer service help line at
1-800-633-1501 for assistance.
ASSEMBLY:
Since the equipment is supplied as grass shear, the
grass cutting blade has to be swapped over for the shrub
trimming blade which is supplied with the product.
Caution! Carry out all the following assembly, dismantling
and adjustment work without a rechargeable battery – risk
of injury.
Always use protective gloves and fit the blade guard
before changing the cutting mechanism.
1.Push the blade release buttons (Fig. 1) on both sides
and remove the blade at the same time. (Fig. 2).
2.Slide the blade housing into the mount on the equipment
housing.
3.Push the blade release buttons on both sides again
(Fig.3) and press the blade into the mount at the same
time. The drive unit on the equipment is now connected to
the blade.
4.Push the battery into the battery mount provided until
you hear the catch click into position. (Fig. 4)
STARTING AND STOPPING
Starting:
1. Remove the blade guard, then push the safety lock
button and press the on/off trigger switch at the
same time.
2. Release the safety lock button.
Stopping:
1. Release the on/off trigger switch. After switching off
wait until the blade is stationary.
2. Mount blade guard.
OPERATING INSTRUCTIONS
This product is intended for light trimming of shrubs,
hedges and lawn edges. Please note that this tool is not
designed for commercial, trade, or industrial use. Only
use this product for the purpose specified in these
instructions. Any other use will void the warranty.
GRASS CUTTER BLADE
Use the grass cutter blade for cutting the edges of lawns
and small areas of grass in private gardens and hobby
areas.
The grass cutter blade is not intended for cutting hedges
of chopping material up for composting.
Edging
Guide the tool along the edge of the lawn.
After use, install the blade guard.
Tips:
− Do not force the unit through dense growth, and if the
blades slow down, reduce your speed.
− Avoid trimming too close to dirt, sand or gravel, as this
could dull the blades and reduce the cutting efficien-
cy.
− Do not allow the blade to contact paved surfaces,
stones or garden walls, as this will rapidly wear down
the blade.
SHRUB TRIMMING BLADE
Use the shrub trimming blade for trimming and shaping
individual bushes, shrubs, and climbing plants in private
domestic and hobby gardens.
The shrub trimming blade is not intended for cutting
grass / edging.
Cutting shrubs
Before using, check the shrubs for foreign objects
e.g. wire, etc.
When using the tool hold it away from yourself and
stand in a secure position with your weight evenly
balanced on both feet.
When cutting, move steadily along the line of cut, so
that stems are fed directly into the cutter blades.
After use, install the blade guard.
6
Model LSS020-1
Fig.1
Fig.2
Fig.3
Fig.4
Click
Loading ...
Loading ...
Loading ...