Dewalt DXAEPI1000 Power Inverter 1000W Car Converter

INSTRUCTION MANUAL - Page 15

For DXAEPI1000.

PDF File Manual, 32 pages, Read Online | Download pdf file

DXAEPI1000 photo
Loading ...
Loading ...
Loading ...
English
14
Speciļ¬c USB Power Port Problems
When the USB ports are in use, the unit will monitor for the following
USB fault conditions on all the USB ports: thermal fault, low battery
voltage fault, overload and short circuit.
Problem Possible Solution
If a fault condition exists
in either of the USB
ports, the LCD will
display the USB fault
condition and the USB
power/fault indicators
shut off. In any of these
cases, the USB ports will
automatically shut down.
Should this occur:
A. Disconnect the USB-powered
device and press the power
button again to turn off the unit
immediately.
B. Allow the unit to cool down for
several minutes before attempting
to use the USB ports again.
C. If a fault occurs again, make sure
that the total draw of all USB
devices plugged into the USB
ports does not exceed 3.1A.
D. If an individual USB device is
within specifications and the fault
occurs, have the USB device
checked for malfunction and do
not continue to use it with these
USB ports.
Common Audio Problems
Problem Possible Solution
Buzzing Sound In
Audio Systems
Some inexpensive stereo systems and
boom boxes make a buzzing sound
when operated from the inverter,
because the power supply in the
electronic device does not properly filter
the modified sine wave produced by the
inverter. The only solution to this problem
is to use a sound system that has a
higher quality power supply.
Television
Interference
The inverter is shielded to minimize
interference with TV signals. However,
in some instances, some interference
may still be visible, especially when the
TV signal is weak. Try the following to
improve the picture:
1. Move the inverter as far away
as possible from the TV set, the
antenna, and the antenna cables.
Use a short AC extension cord, if
necessary.
2. Adjust the orientation of the antenna
cables, and the TV power cord to
minimize interference.
3. Make sure that the antenna feeding
the TV provides an adequate (snow-
free) signal and that high quality,
shielded antenna cable is used.
Loading ...
Loading ...
Loading ...