Loading ...
Loading ...
Loading ...
Installation of Mounting Assembly
YourDisposercomeswith the foBowlngMount System
i
Mount System
B
Read Completely Before Starting
'\ x /
NOTE: Pay close attention to the order of mounting assembly parts, as they have
been correctly assembled by the factory.
A. Evenly apply 1/2" thick rope of plumber% putty around flange (1).
B. Press flange (1) firmly into sink drain. Remove excess putty.
C. Insert fiber gasket (2), backup flange (3) and mounting ring (5). Hold in place
while inserting snap ring (6).
D. Place a weight such as a disposer on the sink flange to hold it in place. Use a
towel to prevent scratching the sink. Pull snap ring open and press firmly until it
snaps into place.
E. Tighten the 1 2/3" screws (3) evenly and firmly against backup flange. Use
shorter screws if sink is more than 3/8" thick.
Grounding instructions
For Waste Disposers eguipped with a
grounded plug-in power cord
This appliance must be grounded. In the
event of a malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This appliance
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
For Waste Disposers not-eguipped with o
grounded plug-in power cord
This appliance must be grounded. In the
event of a malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. The power cord
(to be installed) must have an equipment-
grounding conductor and a grounding
plug. The plug must be plugged into
an appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Disconnect electric power to disposer
circuit before installation. Turn the
circuit breaker to the OFF position or
remove the fuse.
Loading ...
Loading ...
Loading ...