Loading ...
Loading ...
Loading ...
10
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION OF THE ELLIPTICAL
CLIMBER
Adjust the tension of the elliptical climber by rotating the
Tension Control Knob (No. C06) clockwise to increase
the level of resistance. Rotate the Tension Control
Knob (No. C06) counter-clockwise to decrease the level
of resistance.
Tension levels are set at Level 1 being the lowest and
Level 8 being the highest.
ADJUSTING THE BALANCE OF THE ELLIPTICAL
CLIMBER
If you find that the elliptical climber is unbalance
d and
causes movement, you can adjust the balance using the
Left and Right End Caps for
Rear Stabilizer (No. C24
& No. C25).
MOVING THE ELLIPTICAL CLIMBER
To move the elliptical climber, hold the
Upright Post
(No. A02) and tilt it
until the movable wheels located on
the Left and Right End Caps for Front Stabilizer (No.
C22 & No. C23)
touch the ground. With the wheels on
the ground, you can transport it
to the desired location
with ease.
CLEANING
The elliptical climber
can be cleaned with a soft, clean, and damp cloth. Do not use abrasives
or solvents on plastic parts. Please wipe your perspiration off the elliptical climber after each
use. Be careful not to get excessive moisture on the computer
display panel as this might
cause an electrical hazard or computer failure.
Please keep the elliptical climber
, especially the computer, out of direct sunlight to prevent
screen damage.
Please inspect all assembly bolts and pedals on the elliptical climber
for proper tightness every
week.
STORAGE
Store the elliptical climber in a clean and dry environment away from children.
Loading ...
Loading ...
Loading ...