Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/59004578-28357/bgd.png)
– 13 –
EN
7. Preparation Instructions
5 Fig.
4 Fig.
2. If assembling the paint spray gun, rotate the uid
control dial (3) clockwise as far as possible to close
the uid valve (Fig. 3).
3. Wrap a length of PTFE tape around the tool air line
inlet (9) (12) (18) (22) (Fig. 4).
Important: For a more secure seal, the PTFE tape
should be wrapped in the opposite direction to the
thread.
4. Screw the 1/4" air line coupler (I) onto the spray gun
air inlet (Fig. 5).
If using a whip hose, attach a parallel union nut
(Stock No. 25823) instead of the air line coupling.
5. Connect the air line to the air line coupling.
If using a whip hose, wrap a length of PTFE tape
around the whip hose inlet and attach it to the air line.
6. If attached, unscrew the cup lid and pour in the
required quantity of uid.
Important: ALWAYS ensure that any paint is
mixed and thinned and cleaning substances are
diluted or treated according to the manufacturer’s
recommendations. ONLY use biodegradable sprays
with the cleaning gun.
7. Pressurise the air line when you are ready to begin.
8. If using the air gun or tyre inator ONLY, blast a few
jets of the compressed air line through the tool to
clear it of any residual debris.
3 Fig.
(3) (I)
Loading ...
Loading ...
Loading ...