Loading ...
Loading ...
Loading ...
48
the tire is replaced, the tire pressure sensor is damaged, and
tire is replaced for the car with tire pressure monitoring function.
ABS BLEEDING
Anti-lock Braking System (ABS) Bleeding allows you to perform
various bi-directional tests to check the operating conditions of
ABS.
1. When the ABS contains air, the ABS bleeding function must be
performed to bleed the brake system to restore ABS brake
sensitivity.
2. If the ABS tablet, ABS pump, brake master cylinder, brake
cylinder, brake line, or brake fluid is replaced, the ABS bleeding
function must be performed to bleed the ABS.
3. After the oil in the brake oil tank is seriously insufficient or the
brake fluid is replaced, ABS Bleeding is also required
*Note
a) When performing ABS Bleeding, it is necessary to unscrew the exhaust screw of the
ABS pump.
b) After completing the tire pressure sensor learning, it takes a while for the fault light
to go out.
c) Tire pressure imbalance will also cause the tire pressure light to light up.
INJECTOR CODING
This function can write the identification code of the fuel injector
into the ECU so that the ECU can recognize and work normally.
Loading ...
Loading ...
Loading ...