Loading ...
Loading ...
Loading ...
For safety and economic gas usage you should always
use the correct pan on the correct burner.Flames should
not protrude beyond the base of the pan. You will save
energy, time and money by always placing the correct
The chart below gives the correct pan usage for each burner
User Instructions
For safety and economic gas usage you should always
use the correct pan on the correct burner.Flames should
not protrude beyond the base of the pan. You will save
energy, time and money by always placing the correct
pan size on the correct gas ring. See fig. 15.
The chart below gives the correct pan usage for each burner
Burner
Recomended
pan diameter
Minimum
pan diameter
Small burner
Medium
burner
220-260 mm.
Large burner
User Instructions
Use “High flame” setting to bring the pan to the boil, then
adjust the flame between “High flame” and “Low flame”
to maintain the required pan temperature.
Important:
The use of a cooktop leads to the production of heat and
moisture in the kitchen .For this reason make sure that
the room is properly ventilated.Keep natural ventilation
mechanical ventilation device(e.g. a range hood or
overhead exhaust fan). An orangy flame is normal and
simply indicates the presence of salt in the atmosphere
(from cooking). If the flame has yellow patches, this is
not a fault (of any kind).
Boiling burners
such as windows, open or provide a
openings,
pan size on the correct gas ring. See fig. .
14
14
120-140 mm. 120 mm.
140-200 mm. 140 mm.
220 mm.
>
_
Big wok burners
220 mm.
an extra wok trivet. This trivet must be used when using
concave receptacles such as woks, etc.
non-use or misuse of this additional pan support.
Depending on the model, the hotplate is supplied with
than 26 cm diameter, griddle plates and all kinds of
an extra coffee support. This support is for use only
The manufacturer cannot be held responsible for the
with the small burner when supporting receptacles
with a diameter of less than 10 cm.
the wok burner for receptacles with diameters of more
The manufacturer cannot be held responsible for the
Depending on the model, the hotplate is supplied with
non-use or misuse of these additional pan supports.
Wok trivet
Coffee support
15
3
3
4.Once the hob is fitted you should turn the clips and
4
tighten the screw as shown in Fig. 4.
that the hob is resting on its entire perimeter.
3. Place the hotplate on top of the bench cut-out and
press down firmly on all edges at the same time to ensure
8
Loading ...
Loading ...
Loading ...