Loading ...
Loading ...
Loading ...
12
2. Remove the belt from the drive wheel (Fig. 12).
3. Remove the screws, the washers, and the bushings from
the drive wheel (Fig. 13).
4. Disassemble the right side cover by removing the ve (5)
screws that hold it in place (Fig. 14).
5. Use one hand to secure the auger, at the same time, use
the other hand to remove the auger assembly nut on the
right side. (Fig. 15).
6. From the left side, remove the auger axle set (Fig. 16).
7. Remove the old auger from the housing (Fig. 17).
Left side cover
Fig. 11
Drive wheel
Fig. 12
Belt
Bushing
Fig. 13
Washer Screw
Right side cover
Fig. 14
Auger
assembly nut
Fig. 15
Auger axle set
Fig. 16
Loading ...
Loading ...
Loading ...