Loading ...
Loading ...
Loading ...
SuperSlot Overview
Shortcut to SuperSlot view (when available)
Take List
Brings up the Take List
Timecode Jam
Brings up the Timecode Jam screen
Toggle Jog is Select
Toggles between Select and HP knob press
Tone
Toggles tone on/off
Tone Toggle
Emulates Tone toggle
* Toggle
Emulates * toggle
** Toggle
Emulates ** toggle
Display Ch. Fader Gains
Selects whether the fader gains are displayed in the controller’s display. [Off, On*]
Applies to CL-16 and 3rd party controllers.
Soft Fader/Trim Pickup
[Off*, On] When enabled, physical faders and trims on the 8-Series front panel, CL-16, CL-12, and some 3rd party controllers with
non-motorized faders resume gain control only when their physical position reaches the last stored gain value. This prevents sudden
jumps in gain levels when setting gains from more than one control interface.
Note: Last stored gain values are held over a power cycle and may require the adjustment of a physical fader or trim control to
pickup the last stored gain value.
Note: Soft Fader/Trim Pickup also works in conjunction with the SD-Remote. The 8-Series trim/faders pickup control only once they
have reached the last gain set in SD-Remote.
When Soft Fader/Trim Pickup is Off and a controller is connected, the 8-Series front panel controls are disabled unless controlled by
SD-Remote. Use SD-Remote Hide Faders function to prevent SD-Remote changing fader gains accidentally.
Note: When a non-motorized fader controller and SD-Remote are both used at the same time, the controller will not soft pickup fader
or trim control.
Solo Follows Select
Selects whether solo (PFL) mode is engaged on a channel when pressing “Select” from the controller [Off, On*]. Applies to
supported 3rd party controllers and CL-16.
CL-16
Selects CL-16 menu.
1. LED Brightness: 5-100% in increments of 5% (100% is default)
2. LCD Brightness: 5-100% in increments of 5% (100% is default)
3. Long Button Press: 300-1000 ms in increments of 5 ms (500 ms is default)
4. Bank Disable: On or Off (off is default)
5. GPIO Configuration: Opens menu to display GPIO_1 - GPIO_8 (see below for options and details)
6. Channel Colors: Opens a menu to assign background colors to LCD channel strips 1-32.
7. Group Colors: Opens menu to assign Group 1-4 Color (Defaults: 1=Yellow, 2=Orange, 3=Light Blue, 4=Light Green).
Color options: Yellow, Orange, Light Blue, Light Green, Green, Light Brown, Brown, Violet, Pink.
8. Gray Meters: Off or When Disarmed
CL-16 Operation is covered in the CL-16 User Guide.
833 User Guide 77
Loading ...
Loading ...
Loading ...