Loading ...
Loading ...
Loading ...
Channel Setup
1. Phantom Voltage
Selects phantom power voltage for all inputs. [12 V, 48 V*].
2. PFL Mode
Selects the source of the PFL feed. [Auto* Pre-fade, Post-fade] Auto = pre-fade if channel is routed to ISO track
pre-fade, post-fade if channel is routed to the ISO track post-fade.
3. Channel Grouping
Channel Groups can be set to Off, Mute/Arm, Trim/Fader, or Fader. Groups allow the lowest channel number in the group
to act as master control.
● Off: Group disabled. Groups that are Off retain their channel routings but settings and levels are independent
per channel. This allows for quick enabling or disabling of a group without losing group routings.
● Mute/Arm: Only channel mutes and arms are grouped.
● Trim/Fader: Trim, fader, record arming, limiters, and mutes are grouped. Trims can only be grouped when all
channels of the group share the same gain range. Gain ranges depend on input type routed to a channel. See
Channel Screen>Channel Trim Value for more detail.
● Fader: Fader groups act just like Trim/Fader groups but trims remain independent per channel.
Four channel groups are possible; channels grouped can only be assigned to one group.
a. Group 1 [1-8]
b. Group 2 [1-8]
833 User Guide 21
Loading ...
Loading ...
Loading ...