Loading ...
Loading ...
Loading ...
Enter your age.
When a heart rate pro-
gram is selected, the
letters "AGE" and the
begin to flash in the
Speed dispUay.You
_-l0 C Mp.
Km/H 0
SPEED
must enter your age to use a heart rate program, if
you have aUready entered your age, press the Start
button (pressing the Start button at this time wHU
not start the program), if you have not entered
your age, press the Age/'v'Veight Set buttons until
your age is shown. Then, press the Start button.
Your age wHUthen be saved in memory.
Adjust the maximum speed timit for the
program.
After you have entered i [ _l MP.
your age, the btters a--
"SPd" (speed) and the _e Ct
maximum speed limit K,_VHO
SPEED
for the program will
flash in the Speed dis-
play. if desired, change the maximum speed limit
by pressing the Speed buttons.
Press the Start button or the Speed + button to
start the program.
A moment after the button is pressed, the tread-
mill will automatically adjust to the first speed and
incline settings for the program, Hold the handrails
and begin walking.
Each heart rate program is divided into 20 one-
minute segments. (The Time/Pace display wiii
show both the time remaining in the program and
the time remaining in the current segment of the
program.) One target heart rate setting is pro-
grammed for each segment. (The same target
heart rate setting may be programmed for two or
more consecutive segments.)
During the program, the console will regularly
compare your heart rate to the current target heart
rate setting, if your heart rate is too far below or
above the target heart rate setting, the speed of
the treadmill wiii automatically increase or de-
crease to bring your heart rate closer to the target
heart rate setting, if the speed reaches the maxi-
mum speed limit for the program (see step 5 at
the left) and your heart rate is still too far below
the current target heart rate setting, the incline of
the treadmill wiii also increase to bring your heart
rate closer to the target heart rate setting.
The program will continue until no time remains in
the program. The walking belt will then slow to a
stop.
if the current speed or incline setting is too high or
too low, you can adjust the setting with the Speed
or Incline buttons. However, each time the con-
sob compares your heart rate to the current target
heart rate setting, the speed and/or incline of the
treadmill may automatically change to bring your
heart rate closer to the target heart rate setting.
if your pulse is not detec:ted during the program,
the letters "PLS" wiii flash in the Incline/Heart Rate
display and the speed and incline of the treadmill
may automatically decrease until your pulse is de-
tected, if this occurs, see the instructions included
with the chest pulse sensor.
To stop the program at any time, press the Stop
button. Heart rate programs should not be stopped
temporarily and then restarted To use a heart rate
program again, reselect the program and start it at
the beginning.
Follow your progress with the displays.
See step 5 on page 12.
Turn on the fans if desired,
See step 7 on page 13.
When you are finished exercising, remove the
key.
See step 7 on page 14.
18
Loading ...
Loading ...
Loading ...