Loading ...
Loading ...
Loading ...
5
ENGLISH
Multi Function Button (Fig. A)
The articulating head LED
3
has three brightness settings,
low, medium and high.
Low battery indication. If less than 3%, the activated
LED and charge indicator LED will flash two times every 45
seconds until out of power.
1. Press the multi function button
1
once to activate the
articulating head LED
3
high setting.
2. Press the multi function button
1
a second time to
activate the articulating head LED
3
medium setting.
3. Press the multi function button
1
a third time to activate
the articulating head LED
3
low setting.
4. Press the multi function button
1
a fourth time to turn
the off the LED
5
.
NOTE: If the light remains on for more than five seconds,
pressing the multi function button
1
again will result in
turning off the light..
NOTE: With the light activated, a long press of the multi
function button
1
will result in turning off the light.
Articulating Head LED (Fig. A, D, E)
The articulating head LED
3
swivels from 0°–360°.
1. To move the articulating head LED
3
first pull the
pivoting carabiner
4
upwards and away from the LED
light housing
3
.
2. To adjust the beam of the articulating head LED
3
,
swivel and rotate the articulating head LED
3
by twisting
it into the desired position.
3. You can use the pivoting carabiner
4
to prop up the
articulating head LED
3
on a flat surface.
3. Ensure the spring loaded gate
12
returns to it locked
position and locks the pivoting carabiner
4
to the
anchored anchored hose, pipe, tube or cable inside of it.
NOTE: Ensure the pivoting carabiner
4
is fully secured
and will not slide off or along the anchored hose, pipe,
tube or cable beforeproceeding.
4. To remove the pivoting carabiner
4
from the
anchored hose, pipe, tube or cable, open the spring
loaded gate
12
, then grasp the pivoting carabiner
4
and slide the anchored hose, pipe, tube or cable from
the pivoting carabiner opening.
5. Return and secure the pivoting carabiner
4
into place
onto the LED light housing
2
.
Pivoting Carabiner (Fig. A, D)
CAUTION: When the LED light hangs by the pivoting
carabiner, do not shake the LED light or the object from
which it hangs. Do not hang the LED light overhead or
from any electrical wires or anything that is not secure.
Personal injury or property damage may occur.
CAUTION: Only use the pivoting carabiner for hanging
the LED light. The pivoting carabiner is not intended
to support additional weight. Do not attach or hang
anything additional to the LED light or risk of breakage
may occur.
CAUTION: Do not use the pivoting carabiner to reach
with or to support your weight in any situation. The
pivoting carabiner is not intended for fall protection.
The built in pivoting carabiner
4
can be attached to anchored
hoses, pipes, tubes or cables in the space you are working in.
1. To access the pivoting carabiner
4
, rotate thepivoting
carabiner
4
away from the LED light housing
2
.
2. Press down the spring loaded gate
12
on the pivoting
carabiner
4
and slip the hose, pipe, tube or cable in your
work space into the pivoting carabiner
4
.
OPERATION
CAUTION: Do not stare into the LEDs. Serious eye
injury couldresult.
SPECIFICATIONS
DCL182
Voltage V
DC
4
Battery type 18650 Li‑Ion
Lumens
Articulating head LED lm
Low ‑ 250
Mid ‑ 500
High ‑ 1000
Light Beam Angle
Articulating head LED degrees 120
Run Time When Fully Charged
Articulating head LED hours
Low ‑ 12
Mid ‑ 8
High ‑ 3.5
based on product components, temperature and end-
userapplication.
Checking State of Charge (Fig. C)
• When the LED light is ON, the charge indicator LED
10
will illuminate green, yellow or red indicating the percent
of charge in the battery:
- GREEN: ≥50%
- YELLOW: >25% to >50%
- RED: ≤25%
• If less than 3%, light and indicator will flash two times
every 45 seconds until out of power.
• If the color of the charge indicator LED
10
is red or does
not illuminate, charge thebattery.
Magnets (Fig. A)
CAUTION: When the LED light hangs by the magnets,
do not shake the LED light or the object from which
it hangs. Do not hang the work LED light overhead
or from anything that is not secure. Personal injury or
property damage may occur.
CAUTION:
Only use the magnets for hanging the LED
light. The magnets are not intended to support additional
weight. Do not attach or hang anything additional to the
LED light or risk of breakage may occur.
1. The DCL182 has magnets
5
built into the bottom of the
pivoting carabiner
4
.
Loading ...
Loading ...
Loading ...