Gree 1309378 OWNER'S MANUAL

OWNER'S MANUAL - Page 15

For 1309378. Also, The document are for others Gree models: UMAT18HP230V1AF, UMAT18HP230V1AO, UMAT24HP230V1AF, UMAT24HP230V1AO, UMAT30HP230V1AF, UMAT30HP230V1AO, UMAT36HP230V1AF, UMAT36HP230V1AO, UMAT42HP230V1AF, UMAT42HP230V1AO, UMAT48HP230V1AF, UMAT48HP230V1AO

Loading ...

OPERATION OF WIRELESS REMOTE CONTROLLER

CLOCK BUTTON

Press the CLOCK button to enter Clock Setup Mode. The clock icon

will begin flashing. Set the clock by pressing the + or - buttons.

Press once for slow adjustment; press and hold down for fast

adjustment. When finished, press the CLOCK button to save your

clock settings. This is the current time, not the timer setting.

NOTE:

Clock time adopts 24-hour mode. A 12-hour format

is not available.

CHANGING BATTERIES AND ADDITIONAL NOTES

To change batteries, slide cover off battery compartment on back of remote controller. Remove

and safely discard old batteries. Insert two new AAA 1.5V dry batteries, using correct polarity.

Reattach back cover.

NOTE:

• If the remote controller will not be used for a long time, remove batteries to prevent leakage damage.

• Be sure to aim the remote controller at the receiver of the main unit when operating.

• When remote emits a signal, icon will flicker; a tone will be heard when unit receives that signal.

Remove

old batteries

Install

new batteries

CHANGING BATTERIES

Clock Display

TURBO MODE

The desired room setpoint can be achieved faster in TURBO

mode. After selecting the“HEAT”or“COOL” mode button,

push the“TURBO”button. The TURBO icon will be

displayed on the remote controller and the unit will run at an

ultra-high speed. To deactivate the feature, push the“TURBO”

button again. The unit will return to normal operation.

Turbo Mode Display

Loading ...

Gree 1309378 18000 BTU U-Match Series Single Zone Mini Split System

OWNER'S MANUAL - Page 15