PAC RP4-2MB11 Instructions

Loading ...

PAC

| Ph. 866-931-8021 | [email protected]

www.pac-audio.com

Rev. 090916

Page 3

Pacific Accessory Corporation

Radio Replacement & Steering Wheel Control Interface

for 2014 - 2016 Mercedes Sprinter Vehicles

Equipped with a Factory Radio

RP4.2-MB11

Default Steering Wheel Control Programming

IMPORTANT! The interface comes pre-programmed for all of the vehicle’s factory SWC functions and does not require

programming unless you wish to re-assign the SWC functions, or utilize short press long press dual command functionality. The

SWC can always be restored to default settings by pressing and releasing the program button on the side of the interface once

then wait 7 seconds for the LED to ash 3 times.

Default SWC Button Assignments

Alpine JVC Kenwood Clarion Pioneer / Other Sony Fusion

Volume + Volume + Volume + Volume + Volume + Volume + Volume + Volume +

Volume - Volume - Volume - Volume - Volume - Volume - Volume - Volume -

Arrow Up Track + Track + Track + Track + Track + Track + Track +

Arrow Down Track - Track - Track - Track - Track - Track - Track -

Answer Receive Receive Off Hook Send Answer Answer Power

End End Reject On Hook End End Reject/Source N/P

Steering Wheel Controls

Optional Steering Wheel Control Programming

If you wish to re-assign the SWC functions, or utilize short press long press dual command functionality, the interface must be

programmed in the specic order shown in the chart on page 3. If you come across a function in the chart that your steering wheel

does not have, or you do not want to program, press and release the programming button on the side of the interface to skip that

function. The LED will ash off and on conrming that you have successfully skipped that function and are ready to proceed to

the next one.

Short Press Long Press Dual Command Functionality

This feature allows you to assign two aftermarket radio functions to each of the vehicle’s SWC buttons. It can be used with as

many of the buttons as the user likes, or none at all. When this functionality is implemented, quickly pressing and releasing a SWC

button will initiate the short press command, while pressing and holding a SWC button for longer than two seconds will initiate the

long press command. Please note that no long press commands are programmed by default. If you wish to assign dual command

functionality to the SWC please follow the programming steps on the next page.

Loading ...

PAC RP4-2MB11 Audio RadioPRO Radio Replacement Interface For Mercedes Sprinter And Metris