Loading ...
Loading ...
Loading ...
11
Operation
System Setting
Note: Default settings are indicated in bold. Description
USB
KB/Mouse
• Auto
• Source 1
• Source 2
Sets the source that can be controlled by the console keyboard and
mouse.
Note: The source must also be assigned to Display A for this function to work.
Select Auto to allow Source 1 or Source 2 to be controlled by the
console keyboard and mouse, depending on which source is assigned
to Display A.
Peripheral
• Auto
• Source 1
• Source 2
Sets the source that has access to the USB peripherals. The selected
source must also be assigned to Display A for this function to work.
Select Auto to allow either Source 1 or Source 2 to access the
attached peripherals, depending on which one is assigned to Display A.
Note: The source device must be a laptop, PC or tablet, and connected to the
USB host port on the unit. For details on the required setup, refer to Operating
PCs/Laptops/Tablets.
Audio
Source
• Display A
• Display B
Sets the audio source.
I/O
• All
• S/PDIF / Coaxial
• L/R
Sets the allowed output type (stereo, digital, or both).
Mute
• Enable
• Disable
Mute or unmute the unit.
Source
Auto Switch
• ON
• OFF
Enables this function to have Display A automatically switch to a newly
connected source.
Source 1
• Auto
• HDMI
• VGA
Sets the input source for Source 1. Select Auto to allow input from the
connected HDMI or VGA source. When Auto is selected, the input
defaults to the HDMI source.
Source 2
• Auto
• HDMI
• DisplayPort
Sets the input source for Source 2. Select Auto to allow input from the
connected HDMI or DisplayPort source. When Auto is selected,
the input defaults to the HDMI source.
Source 3
• Auto
• HDMI
• AV / YPbPr
Sets the input source for Source 3. Select Auto to allow input from the
connected HDMI or AV/YPbPr source. When Auto is selected, the input
defaults to the HDMI source.
EDID
• Display A
• Remix
• Default
Display A: Sends EDID information of Display A to the sources.
Remix: Sends optimum EDID among the connected displays to the
sources.
Default: Sends the predefined EDID to the sources.
Maintenance
Firmware Upgrades
Upgrades the unit firmware.
Note: Save the firmware file to a USB drive and plug it into the unit before
performing an upgrade.
Reset to Default Sets the unit to its default settings.
Exit Closes the OSD.
Loading ...
Loading ...
Loading ...