Loading ...
Loading ...
Loading ...
The operation of any !awn mower can result in foreign objects thrown into
the eyes, which can result in severe eye damage.. Always wear safety
glasses or eye shields wht!e operating your lawn mower or performing any
adjustments or repairs.. We recommend standard safety glasses or a wide
vision safety mask worn ever spectacles.
HOW TO USE YOUR LAWN MOWER
ENGINESPEEDCONTROL
MODELS WITH REMOTE THROTTLE
Engine speed is controlled by the Ihrotlie
control located on lhe upper handie.
. Move lever forward to FAST engine
speed for starting and better bagging..
° Move lever backward for SLOW engine
speed
, Some models have engines equipped
with a choke feature. Move the lever alI
the way forward tothe CHOKE position
when starting a cold engine.
NOTE: Be sure engine START/STOP
switch (if equipped) is in the ON posilion
SLOW
FAST , ....
|1
CH "_ ' ' U I. 1 't
l I
throttle
control
MODELS WITH FIXED SPEED ENGINES
Engine speed was set at the factory for
optimum performance. Engine speed is
not adjustab!e.
TO ADJUST CUTTING HEIGHT
Adjustcutting heightto suit your require-
ments, Medium positionis best for most
lawns. Raise wheels for low cut and lower
wheels for highcut,,
MODELS WiTH MANUAL ADJUST
BOLT-ON WHEELS
, Remove wheel, bolt, and hardware and
reassemble in desired adjustment hole.
o Reinstall wheel components in the same
order as they were before removal.
Tighlen securely,.
o Make sure altwheels are at same height..
Flat washer
Wh
3t8-16
Spacer Locknut
MODELS WITH "QUICK ADJUST"
WHEEL HEIGHT ADJUSTERS
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjustall
wheels to the same cutting height..
. Raise wheels for low cut and !ower
wheels for high cut.
. Adjust culling height to suit your require-
menls. Medium position is best for most
lawns,
° Tochange cutting height, squeeze adjuster
lever toward wheel., Move wheel up or
down to suit your requirements, Be sure
all wheels are in the same setting,
NOTE: Adjuster isproperlypositioned when
plate tab inserts into hole in lever. Also, 9-
position adjusters (if soequipped) allow lever
to be positioned between the plate tabs°
LEVERBACKWARD Platetab
TO LOWERMOWER
LEVERFORWARDTORAISE MOWER Lever
Loading ...
Loading ...
Loading ...