Loading ...
Loading ...
Loading ...
[
controlbar
uP
MOWING
_.__POSITION
//
Upper
handte
Handle
knob
Lower handle
3 POSITION "EZ" HANDLES
. Raise lower handle section to operating
posilion and align hole in handle with
one of three height positioning holes.,
. Insert handle bolt through handle and
bracket and secure with knob,
o Repeat for opposite side of handle,
Knob ' _"_ Bolt
/ Handle
adjustment
bracket
3 POSITION "QUICK" HANDLES
° Raise lower handle section to operating
position and squeeze the bottom ends
of lower handle towards each other until
the pin in handle can be inserted into
one of the three heighl adjustment holes,,
pfn
SQUEEZE
J
Handle
adj
bracket
ALL HANDLES
o Raise upper handle section into place on
lower handle, remove protective padding
and tighten both handle knobs
,, Remove handle padding holding opera-
tor presence control bar to upper handle°
o Your lawn mower handle can be ad-
justed for your mowing comfort. Refer to
"ADJUST HANDLE" in the Service and
Adjustments section of this manual
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same culling height,
INSTALL REAR WHEELS
(HIGH WHEEL MOWERS ONLY)
Some high wheel models require washers
whichwillbe provided inapartsbag Ifprovid-
ed, installwasherson the axlefirst asshown,
• Install one (1) rear wheel on the axle of
rear wheel adjuster°
. Install 3/8-16 Iocknul and tighten securely,
,, Repeat procedure for other rear wheel,
Axle
FIanged
Iocknut assembly
ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: If your model lawnmower
is mulcher ready, the mulcher plate or p_ug
must be removed before using mower as
a bagger° To convert mower to bagging or
discharging, see the Operation section in
this manual_
Look at the different grass catcher illustra-
tions thatfollow, Determine which type
of grass catcher you have and follow the
appropriate instructions.
Loading ...
Loading ...
Loading ...