Loading ...
Loading ...
Loading ...
PSR-SX600 Owner’s Manual 109
3
Troubleshooting
USB Audio Player/Recorder
A message indicating the drive is busy appears, and the record-
ing is aborted.
Make sure to use a compatible USB flash drive (page 95).
The USB flash drive may not have enough memory. Check the
Recordable Time on the display (page 76).
If you are using a USB flash drive to which data has already been
recorded, check first that no important data remains on the device,
and then format it (page 96) and try recording again.
Audio files cannot be selected. The file format may not be compatible with the instrument. The
compatible format is only WAV. The DRM protected files cannot be
played back.
Recorded file is played back at a different volume compared to
when it was recorded.
The audio playback volume has been changed. Setting the volume
value to 100 plays back the file at the same volume as when it was
recorded (page 74).
Mixer
The sound seems strange or different than expected when
changing a rhythm Voice (Drum kit, etc.) of the Style or Song from
the Mixer.
When changing the rhythm/percussion Voices (Drum kits, etc.) of
the Style and Song from the VOICE parameter, the detailed settings
related to the drum voice are reset, and in some cases you may be
unable to restore the original sound. In the case of Song playback,
you can restore the original sound by returning to the beginning of
the Song and playing back from that point. In the case of Style
play, you can restore the original sound by selecting the same Style
again.
Foot Pedal
The on/off setting of the footswitch connected to the FOOT
PEDAL jack is reversed.
Change the polarity settings: [MENU] → Menu1 → Controller →
[ENTER] → Setting → 4 Pedal Polarity.
Connections
The speakers do not switch off when a pair of headphones is
connected to the [PHONES] jack.
The Speaker setting is “On.” Change the speaker setting to “Head-
phone Switch” via [MENU] → Menu2 → Utility → [ENTER] →
Config1 → 1 Speaker.
The Wireless LAN icon is not shown in the Menu display even
though the USB wireless LAN adaptor is connected.
Disconnect the USB wireless LAN adaptor and connect it again.
Loading ...
Loading ...
Loading ...