Loading ...
Loading ...
Loading ...
English Installation and Operation Page 5
pro.Bose.com Important Safety Instructions
1. Read these instructions.
2. Keep these instructions – for future reference.
3. Heed all warnings – on the product and in all product documentation.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. To ensure reliable
operation of the product and to protect it from overheating put the product in a position and location that will not
interfere with its proper ventilation.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third
prong is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time to prevent damage to this
product.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way such as power-supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus;
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not attempt
to service this product yourself. Opening or removing covers may expose you to dangerous voltages or other hazards.
Please call Bose to be referred to an authorized service center near you.
This product conforms to all applicable EU directive requirements. The complete Declaration of Conformity can be
found at www.Bose.com/compliance.
is Product meets the immunity requirements for the E2 class EN55103-2 directive.
Initial turn on inrush current:
IZA 2120-LZ and IZA 2120-HZ: 12.6 Amps (230V/50 Hz), 6.6 Amps (120V/60 Hz)
ZA 2120-LZ and ZA2120-HZ: 12.6 Amps (230V/50 Hz), 7.8 Amps (120V/60 Hz)
Inrush current after 5 seconds AC mains interruption:
IZA 2120-LZ and IZA 2120-HZ: 12.5 Amps (230V/50 Hz), 6.5 Amps (120V/60 Hz)
ZA 2120-LZ and ZA2120-HZ: 12.3 Amps (230V/50 Hz), 7.7 Amps (120V/60 Hz)
Information About Products at Generate Electrical Noise (FCC Compliance Notice for US)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at one’s own expense.
This product complies with the Canadian ICES-003 Class A specifications.
CAN ICES-3(A)/NMB-3(A)
Loading ...
Loading ...
Loading ...