Loading ...
Loading ...
Loading ...
8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
(877-907-8669).
STEP 3:
Remove 6 Screws (No. 70), 4 Washers
(No. 45)， 2 Big Arc Washers (No. 25)
and 6 Spring Washers (No. 17) from the
Main Frame (No. 1) with Allen Wrench
(No. 121).
CAUTION: Please make sure the Tension
Control Knob (No. 75) is at the lowest
resistance level (level 1, all the way to the
left) before you connect any wires together.
Attach the Tension Control Wire (No.
75a) into the metal bracket of Tension
Wire (No. 71) as shown in drawing A.
Then, pull Tension Control Wire (No.
75a) upward and insert it into the slot of
metal bracket of Tension Wire (No. 71) as
shown in drawing B. Make sure the metal
fitting on Tension Control Wire (No. 75a)
is secured in the metal bracket.
Connect the Extension Sensor Wire (No.
73) with Sensor Wire (No. 72). Insert the
connecting wires into Front Post (No. 4).
Attach the Front Post (No. 4) to the Main
Frame (No. 1) with 6 Screws (No. 70), 4
Washers (No. 45), 2 Big Arc Washers
(No. 25) and 6 Spring Washers (No. 17)
that were removed. Tighten and secure
with Allen Wrench (No. 121).
NOTE: Be careful not to pinch any wires
when attaching Front Post (No. 4) to Main
Frame (No. 1).
Loading ...
Loading ...
Loading ...