Loading ...
Loading ...
Styling Tips
For Maximum
Volume and Body
1. To turn the appliance on, select the
correct heat setting for your hair type.
2. Start by sectioning the hair. Be sure
to comb through hair so it’s detangled.
3. Place the appliance into the hair,
close to the roots, and brush through
the section.
4. Move the brush through the hair
toward the ends, and as you reach
the end of the section, start to rotate
the brush away from your head by
pressing and holding the appropriate
rotate button.
5. As you do this, resist the rotation
of the brush by pulling the brush
downward. Tension created through
the section of hair will help to smooth
hair faster.
IMPORTANT! It may take several
attempts to perfect this technique.
If the brush spins too quickly, simply
release the rotation button and remove
styler from the hair.
6. For added root lift, hold the brush
in place at the roots for a few seconds.
7. For even more volume, allow the
brush to rotate, winding the section
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER –
Any appliance is electri-
cally live even when the switch is off. To reduce
the risk of death or injury by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other
liquids.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING –
To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance should not be used by, on,
or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended use
as described in this manual. Do not use at tach-
ments not recommended by the manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped, damaged,
or dropped into water. Return the appliance
to a Conair Service Center for examination
and repair.
5. Keep the cord away from heated surfaces.
Do not pull, twist, or wrap line cord around
appliance, even during storage.
6. Never block the air openings of the appliance
or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked.
Keep the air openings free of lint, hair, and the
like.
7. Never use while sleeping.
8. Never drop or insert any object into
any opening or hose.
9. Do not use outdoors or operate where aero-
sol (spray) products are being used or where
oxygen is being administered.
10. Do not use an extension cord to operate hot
air styler.
11. Do not direct hot air toward eyes or other
heat-sensitive areas.
12. Attachments may be hot during use.
Allow them to cool before handling.
13. Do not place appliance on any surface
while it is operating.
14. While using the appliance, keep your
hair out of it. Keep your hair away from the
air inlets.
15. Do not use with a voltage converter.
16. This appliance is not a toy. Keep away from
children.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for household use
only. Use on Alternating Current (60 hertz) only.
Standard hot air stylers are designed to oper-
ate at 110 to 125 volts AC.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat
this safety feature.
NOTE: Do not use this styling appliance on
hair extensions.
CHECK ALCI SAFETY FEATURE EVERY TIME
YOU USE APPLIANCE.
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety
feature that renders it inoperable under some
abnormal conditions, such as immersion in
water. To make sure the ALCI is functioning
properly, perform the following test. The pur-
pose of this test is to allow you to make sure
the water sensing system (ALCI) is working.
1. Plug in the appliance and press test button
on plug (see diagram).
2. The appliance will stop working. There will
be an audible click and reset button will pop
out. This indicates
the ALCI is function-
ing properly.
3. To reset ALCI with
a reset button, unit
should be unplugged.
Then push reset but-
ton in and reinsert
plug into outlet.
4. If ALCI is not functioning properly, return
appliance to service center.
5. It is important that if immersion occurs, this
unit be brought to a service center. Do not try
to reset.
6. Be sure to repeat test every time you use the
unit to confirm ALCI is operational.
Should the appliance go off and the reset
button pop up during use, this could indicate
a malfunction in the unit. Remove plug from
outlet and allow the appliance to cool. Reinsert
plug into outlet.
The appliance should then function normally.
If not, return it to an authorized Conair Service
Center for evaluation and repair.
THE IONIZING FUNCTION
generates negative ions to:
• neutralize the generally positive charge
on flyaway, frizzy hair
• eliminate static electricity
• contribute to shine
NOTE: The unit may produce a clicking
sound at times, which is normal for a
high output ion generator.
3 Heat/Speed Settings
Low Setting: This position combines ideal
airflow and temperature setting for shaping
finer, damaged or treated hair.
High Setting: Combines ideal airflow with high-
er temperature, especially recommended for
pre-drying, and also for styling thick hair.
Cool Setting: Using the cool setting at the end
sets the style for a long-lasting effect. The
rotation/spin function is not needed for cool
setting, so that style can easily be set.
Rotation Settings
There are two rotation speed settings. To make
the brush head rotate, press the buttons
marked << and >>. These will make the brush
head rotate clockwise and counterclockwise.
The rotation can be used on the low and high
settings. When the appliance is used on the
cool setting, the brush head will not rotate. For
best results, use the rotating brush feature to
create styles with gorgeous volume and shine.
You can also use the hot air styler without the
rotation function.
Protective Covers
After every use, always ensure that the protec-
tive covers are placed over the brush heads.
This protects the bristles and keeps them from
being damaged.
GET TO KNOW YOUR STYLER
Rotating 2-in.
tourmaline
ceramic-
coated brush
barrel
Spin control:
Left-Right
Turn dial
with 3 heat/
speed settings:
low/high/cool
BONUS
2 protective covers
1½-inch attachment
Reset
Test
Tourmaline Ceramic Technology
The rotating barrels deliver even, tourmaline
ceramic heat, eliminating damaging hot spots
for beautiful, frizz-free shine.
FEATURES
• 500W
• High-shine, ionic conditioning
• 2-in. tourmaline ceramic-coated barrel with
soft, antistatic brush bristles
• 1½-in. tourmaline ceramic-coated barrel with
soft, antistatic brush bristles
• 2 heat settings, plus cool setting
• 2 rotation directions for total c ontrol
• Use with or without spin function
• Multidirectional brush
• 2 protective brush covers
• Professional power cord
TO SWITCH BRUSH ATTACHMENTS
Press side buttons at the same time to release
attachment head. Remove attachment. Place
brush on handle and lock into place.
TIPS
2-INCH ATTACHMENT
For smoother styles and luxurious volume
1½-INCH ATTACHMENT
For more defined curls, waves and body
TO STYLE HAIR
If you have long or thick hair, you may find it
quicker and easier to use a hair dryer first to
dry your hair and remove the excess moisture.
For added volume, turn your head upside down
as you dry.
Once the hair is 80% dry, you can start to
create your style using the InfinitiPRO by
Conair
®
Hot Air Spin Brush.
Release/lock
attachment buttons
Loading ...
Loading ...
Loading ...