Loading ...
Loading ...
Loading ...
Protection Mode Error Codes
SC0
SC1
SC4
hot
r-6
Standby Overvoltage Protection: Standby voltage too high.
Power o the desk, check the connection between power
and the controller, and power on again. If error code
persists, please contact technical support.
Power Supply Overvoltage Protection: Input voltage too high.
If the correct AC adapter is being used, power o the desk,
check the connection between power and the controller,
and power on again. If error code persists, please contact
technical support.
Operating Overvoltage Protection: Operating voltage too
high. Power o the desk, check the connection between
power and the controller, and power on again. If error
code persists, please contact technical support.
Overheating Protection: When the motor has been working
continuously for too long, it will stop operating to prevent
overheating. Wait for at least 18 minutes (until error code
disappears) before making any further height adjustment.
Power Supply Overvoltage Protection (during use): Input
voltage too high. Error clears when power supply voltage
returns to normal. If error code persists, please contact
technical support.
rst
E10
Reset Warning: Continue to complete reset.
Short Circuit Protection: Power o, check the cable
connections, and power back on again. If error persists,
please contact technical support.
Loading ...
Loading ...